Buy JET JML 1014VSI 10-Inch-by-14-Inch Variable Speed Indexing Mini LatheJET JML 1014VSI 10-Inch-by-14-Inch Variable Speed Indexing Mini Lathe Product Description:
- Variable Speed Mini-Lathe;10 inch swing; 14 inch bed length; quick release levers
- 1/2 HP engine; 400-3,900 RPM; tailstock has a live center and 2" ram capacity
- Quick release levers allow for easy & accurate positioning of tool rest and tailstock
- 1/2HP totally enclosed, fan cooled motor powers 6 spindle speeds ranging from 500-3,975 RPM
- The Mini-Lathe includes 6" Tool rest, Live center, 3" face plate, spur center, tooling knockout, and safety goggles.
Product Description
JML-1014IVS: 10"x 14" Mini Lathe with Indexing Head Model 708375VS replaces the popular JML-1014. Without changing the basic reliable lathe, Jet has added arbor locks and 24 position indexing. Your wood turning can be enhanced by adding fluting, which is running decorative grooves lengthwise down a spindle by utilizing the indexing options. This powerful cast iron machine provides stable, virtually vibration free turning.Variable Speed. 10" swing over the bed. 14" Spindle capacity - which can be increased by adding a 20" bed extension. 1" x 8 TPI Spindle. #2 Morse Taper on head and tailstock. Motor: 1/2 HP, 1 Ph, 115 V. Overall dimensions 24-5/8" D x 7-1/4" W x 14" H. Includes 6" tool rest, live center, 3" faceplate, spur center, tooling knockout, and safety goggles
Customer Reviews
Most helpful customer reviews
57 of 57 people found the following review helpful.
By Tom T
This is an excellent lathe. Mine did arrive with a damaged hinge plate on the motor contrll box but Jet gets an A+ for customer service by FedExing a new one right away without any fuss.This is my third lathe and a second one to have on hand for doing smaller items. That way I don't have to fire up my 2HP Powermatic just for small stuff. I am very impressed with the general operation.The new indexing feature is a nice addition to this lathe. It has 24 indexing positions which is plenty for a mini lathe. Indexing is done via a spring loaded threaded pin just in front of the handwheel. Pushing it in engages the lock, release and it springs back out. Push it in and turn it to engage the threads and you have hands free use of the locked spindle. Just remember to unlock it before starting the lathe up.The variable speed is easy and accomplished by five speed settings on a dial, combined with three belt settings. A belt setting of LOW gets 500-1200 RPM; MED 1100-2600 RPM; HIGH 1700-3900 RPM. A plate on top of the motor controll box has all the speed settings posted there. Changing the belt positions takes all of 20 seconds. Probably less with smaller hands than mine!As a test, I mounted a branch section 8"long x 3" diameter, and 1" off center. Starting the lathe at 500 RPM produced no significant vibration. This was with the lathe just sitting on a bench, not bolted down. I slowly turned the knob to speed three, 680 RPM, and vibration became too much. Speed one and two would have been more than enough to rough the piece down to round.
37 of 37 people found the following review helpful.
By Scott A. Thompson
After perhaps a month of reading and comparing mini lathes, I choose to buy the JET 1014VS. I am totally satisfied with this lathe and look forward to "turning" each new project.The 1014VS is a stout machine that actually hums at higher speeds - No vibration, just smooth operation.My lathe did arrive with a broken control box, perhaps the manufacturer will retrofit with a metal appliance someday. Replacing the control box was relatively easy and the Customer Support lady was very helpful.I am a very happy customer.
35 of 35 people found the following review helpful.
By Landon L. Smith
After comparing alot of mini-lathes I decided the Jet would win out. It offers all the features I was looking for as a beginning wood turner. The centers line up absolutely dead-on. Very nice balance, nothing but a hum at high speeds. Wish the control box was metal but as long as the plastic does not become brittle and crack it wont matter. Only other design flaw I see is the power cord placement exiting the control box does not allow it to swing fully open thus restricting access to the belt and lower pulleys making the belt chang a little more difficult than it should be. Over-all I am very pleased with the lathe. Very Solid tool,I would reccommend it to anyone.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
Kinetik HC2400